Specifications:
Engine
| Engine Model | Branson A2300N2 IDI |
| Aspiration | Natural |
| Emissions Standards | Tier 4 |
| Engine Gross Power | 48 hp |
| PTO Power | 40 hp |
| No. of Cylinders | 4 |
| Displacement | 139.5 cu.in (2,287 cc) |
| Rated Revolution | 2600 RPM |
| Fuel Tank Capacity | 7.1 gal (27 L) |
| Air Cleaner | Dry Element |
| Alternator – 12 Volt amp | 50 |
Drivetrain
| Transmission | HST |
| Forward/Reverse Method | HST |
| 4 Wheel Drive | 2WD/4WD |
| No. of Traveling Speeds | 3 Range |
| Forward Traveling Speed | 14.9 mph (24 km/h) |
| Reverse Traveling Speed | 14.3 mph (23 km/h) |
| Clutch | Dry Single Type |
| Brake | Wet, Multi-disc |
| Differential Lock | STD |
| Cruise Control | STD |
Hydraulics
| Steering | Hydrostatic Power Steering |
| Total Hydraulic Flow (POWER STEERING + Implement) | 14.3 (4.4+9.9) gpm/ 54.2 (16.8+37.4) lpm |
| Lift Control Type | Position |
| Joystick Valve | STD |
| Rear Remote (Port) | Optional (Up to 4) |
3 Point Hitch
| 3 Point Hitch | CAT I |
| Lift capacity at lift link ends | 3,306 lbs (1,500 kg) |
| 3Point Hitch Lift Capacity @24″ behind lift point | 2,425 lbs (1,100 kg) |
PTO
| Rear (Mid) PTO Speed | 540 RPM |
| Rear PTO Type | Independent |
| Clutch | Wet, Multi-disc |
Tires
| AG Front | 8 – 16 |
| AG Rear | 12.4 – 24 |
| Ind. Front | 10 – 16.5 |
| Ind. Rear | 420/70×24 |
Dimensions
| Wheelbase | 65.7 in (1,670 mm) |
| Overall Length (W/ 3PT) | 120.9 in (3,071 mm) |
| Min.Overall Width | 56.3 in (1,430 mm) |
| Overall Height (W/ ROPS) | 97.3 in (2,471 mm) |
| Ground Clearance (4WD) | 14.4 in (366 mm) |
| Min.Turning Radius (W/ Brake) | 7.51 in (2.29 mm) |
| Weight (W/O Front Weights) | 3,278 lbs (1,487 kg) |
BL150 Loader (Option)
| Maximum Lift Height | 104 in |
| Clearance with Attachment Level | 95 in |
| Clearance with Attachment Dumped | 78.2 in |
| Reach at Maximum Height | 20.4 in |
| Reach with Attachment on Ground | 70.5 in |
| Maximum Dump Angle | 46 degrees |
| Attachment Rollback Angle | 35 degrees |
| Digging Depth Below Grade | 1.8 in |
| Overall Height in Carry Position | 52.4 in |
| Depth of Attachment (to back of inner shelf) | 20.9 in |
| Height of Attachment | 20.9 in |
| Depth of Attachment (to pivot pin) | 27.2 in |
| Lift Capacity to Full Height @ Pivot Pins | 2200 lbs |
| Breakout Force | 3660 lbs |
| Relief Valve Setting (loader control valve) | 2532 psi |
| Lift Cylinders | 2.2 x 1.2 in |
| Bucket Cylinder | 2.0 x 1.2 in |
| Bucket Specification | 62 in |
